Our machines

extruder

Extruder

Unit of power: 55kW/73.7 HP
7 heat zones @ 14” 4000w
2 meter barrel – 110mm screw
# of People: 2
Avg output per day: 400 kgs
Country of origin: South Africa

Wash Line

5 turbines run by a geared 1 kW motor
Speed motor 1360/15
Three chambers
Volume per chamber: 1000 litres
Country of origin: Kenya

wash line

 Extrusion challenges and advice

Extruder set-up

Related Content

Production methods

Read about the different production methods that can be used with plastics, and what we use at The Flipflopi Project.

} 2 minute read

Extruder machinery

Extrusion: Learn about the different machine parts, modifications we have made, apparatus, and other essential equipment.

} 3 minute read

Settings and process

Different plastics will need different extruder settings. It’s also important to follow the correct process, described here step-by-step.

} 6 minute read

Moulds

It’s important to design and make moulds correctly for your extrusion process. This section covers making your moulds, tips on how to use them, and how to remove your plastic from the mould.

} 6 minute read

Extrusion challenges and advice

It is normal to encounter some challenges when using an extruder. This section describes common issues, how to diagnose problems, and how to overcome them.

} 5 minute read

Our machines

The machines we use for extruding and washing, with specifications to help you decide on the size you need.

} 2 minute read